Forum: VirtualDJ 8.2 Technical Support

Use this forum to report any bug, questions or comment related to VirtualDJ 8.2.

(NOTE: VirtualDJ 8.2 is continuously updated, so many older topic on this forum are most probably already fixed in the current build)
Topic: PIONEER DDJ-SZ2 - Page: 1
I CANNOT CONNECT MY PIONEER DDJ-SZ2. DO YOU NOT HAVE THE DRIVER FOR THIS YET?

Inviato Wed 12 Apr 17 @ 10:47 pm
The ddj sz2 is currently not supported in VDJ.

Inviato Wed 12 Apr 17 @ 11:45 pm
I guess I should rethink having vdj infinity

Inviato Mon 17 Apr 17 @ 11:38 pm

Inviato Tue 18 Apr 17 @ 2:18 am
I got rid of my Pioneer , and went to the Denon 8000 works better with Virtual DJ and it had PFL !

Inviato Wed 19 Apr 17 @ 2:04 pm
Well, this stinks. I bought the SZ2 when it came out, thinking that a driver would be made available.

Inviato Wed 19 Apr 17 @ 7:10 pm
FYI: We are working to provide a native mapper for Pioneer DDJ-SZ2 as soon as possible.
However, as always, we can't provide an ETA

Thanks

Inviato Wed 19 Apr 17 @ 11:43 pm
tjfadoPRO InfinityMember since 2013
Does Virtual Dj 8.2 work well with Pioneer DDJ-RZ?

Inviato Fri 21 Apr 17 @ 11:33 am
Yes VDJ 8.2 does support the DDJ RZ.

Inviato Fri 21 Apr 17 @ 12:56 pm
tjfadoPRO InfinityMember since 2013
toppadon wrote :
Yes VDJ 8.2 does support the DDJ RZ.


Thanks for the feedback.

Is it fully supported though?

Inviato Fri 21 Apr 17 @ 2:04 pm

Inviato Fri 21 Apr 17 @ 2:45 pm

Inviato Fri 21 Apr 17 @ 2:50 pm
Oh yes .... at the bottom of the Pioneer gear. I thought the controllers would be in sequential alphabetical order. silly me.

Inviato Fri 21 Apr 17 @ 2:56 pm
That would be too logical :)

Inviato Fri 21 Apr 17 @ 2:59 pm
Handyman wrote :
Well, this stinks. I bought the SZ2 when it came out, thinking that a driver would be made available.


A driver is available - from Pioneer. This is the VDJ forum. Atomix don't make drivers for Pioneer.


Before purchasing any hardware for VDJ, you should always check the list of supported hardware to see if your intended unit is there.



Inviato Fri 21 Apr 17 @ 5:10 pm
I bought the DDJ RZ and it works pretty well for the most part it's a couple things on there I don't work like mixing master queuing and two of the effects but other than that it seems to work pretty good

Inviato Sun 23 Apr 17 @ 9:32 pm
tjfadoPRO InfinityMember since 2013
Hello, Can anyone help pls..
Note: I am not a pro dj.

I am using VDJ 8.2 & Pioneer DDJ-RZ

1. VDJ 8.2 settings i modify would not save! Everytime i relauch VDJ, it automatically resets to the factory settings
2. When i connect my headsphones into the DDJ-RZ unit, Deck 2 would not play, all i see is null and track title in the info window.
3. The play button on both VDJ & DDJ RZ does not stop play instantly when clicked (On screen) or on the unit. The tune just slows down (drags)

Thanks

Changed your RX to RZ by AMAHM

Inviato Tue 02 May 17 @ 1:45 pm
tjfado wrote :
I am using VDJ 8.2 & Pioneer DDJ-RX

I guess you mean DDJ-RZ ?

tjfado wrote :
1. VDJ 8.2 settings i modify would not save! Everytime i relauch VDJ, it automatically resets to the factory settings

Which settings ? Can you give an example here (or more)

tjfado wrote :
2. When i connect my headsphones into the DDJ-RZ unit, Deck 2 would not play, all i see is null and track title in the info window.

Can you post a screenshot ? Also, have you read the manual for RZ ? Are you sure you're using the correct mode (Internal mixing) with the correct audio setup ?
Take a look here: http://www.virtualdj.com/manuals/hardware/pioneer/ddjrz/installation.html

tjfado wrote :
3. The play button on both VDJ & DDJ RZ does not stop play instantly when clicked (On screen) or on the unit. The tune just slows down (drags)

That's because you have VINYL SPEED slider on deck 2 turned to a non zero value. Turn the slider all the way to the left.
Read description for element 39 here: http://www.virtualdj.com/manuals/hardware/pioneer/ddjrz/layout/decks.html



Inviato Wed 03 May 17 @ 3:19 pm
It looks like the Pioneer DDJ-SZ2 is now supported in the latest Early Access release (b3734)

Inviato Wed 10 May 17 @ 1:31 am
Is it definitely the case that VDJ now fully support DDJ-SZ2?
It seem that Vdj recognise the controller but SZ2 and VDJ are not working together but independently. When I opened VDJ with RZ2 connected there was a message about mapped skin. The jogs and buttons (deck section) on SZ2 doesn't work in sync with VDJ even though I can scroll the tracks in VDJ using SZ2 and load them. The faders and EQ trims synchronises with VDJ and that's it. Is there other settings I'm missing???? Thanks

Inviato 9 hours ago
Pagina : [>] [>>]
87%