Forum: VirtualDJ Technical Support
(NOTE: VirtualDJ continuously updated, so many older topic on this forum are most probably already fixed in the current build)
If you need extended support, contact our Support Team.
Forum Guidelines (*) The moderators hold the rights to move or modify posts in order to keep the discussions clear or to facilitate the search.
Topic: Experiencing BMP Fluctuations in Timecode, please help advise optimum settings, is there a pitch sensitivity value like VDJ 7 ? - Page: 1
Inviato Sat 03 Feb 18 @ 3:06 pm
Here 2x Links over Timecode:
Greatings , Dirk
Inviato Sat 03 Feb 18 @ 7:07 pm
Thanks for the reply, I know how to set it up, I just need to know how to tweak it to stop the fluctuations , thannks
Inviato Sat 03 Feb 18 @ 8:45 pm
When I connect my vinyl turntables to my phono/line inputs, I keep getting a low signal sound regardless how much I adjust my gain. What should I do?
It is recommend that users connect the AMX to the USB port closest to their power supply. This USB port will draw the most power to their AMX controller. Since the AMX controller doesn't have a power supply, it only draws power from the USB port.
Can you try a usb hub or in the worst case another audio interface?
I used to have the same problem with my maya44, & that was also becouse the lvl's where too low.
Inviato Sun 04 Feb 18 @ 9:28 am
Check the timecode tab on the options window and use calibrate there.
Look at the signal there to see if the signal is entering your computer clean. If not you may have to adjust gain, or check for cables or ground loop issues.
Inviato Mon 05 Feb 18 @ 10:56 am
Inviato Tue 06 Feb 18 @ 2:06 pm
Inviato Tue 06 Feb 18 @ 10:46 pm
Inviato Wed 07 Feb 18 @ 12:46 am
Inviato Thu 08 Feb 18 @ 12:28 am
Maybe they can implement something like SDJ did??
Inviato Thu 08 Feb 18 @ 2:01 am
Inviato Thu 08 Feb 18 @ 1:03 pm
Brand new out of the box VDJ8 TimeCodes (White)
TT's - SL1200
New Pitch on both TT's & adjusted to specs.
Latency at 8ms
Pitch Quality at 0
timecodeAntiSkip - 3
timecodeNeedleDropSync - NO
timecodePitchSliderIgnorBend - NO
timecodeSilence - 0.180000
It only happens when the pitch is at +2, +3 & +4 on both TTs with Both VDJ8 TimeCodes.
It doesn't happen with Serato V2 Time Codes. I tested 4 Serato V2 Time Codes on both TT's and pitch was steady from -8 to +8.
You know what they say, if is not on video, it never happen.
Inviato Thu 08 Feb 18 @ 4:54 pm