DJ Modernsound I am Haitian. I live In New York. I love technology since I was little. I am a digital DJ. I dj Konpa, Zouk, Reggae, Soca, Hip-pop & R&B. I also mix Haitian carnival songs a great deal which Haitian DJs usually touch only during carnival season In Haiti. I am Married with one baby girl.

Tue 15 May 07 @ 4:09 am

DJ MODERNSOUND








I put a little visual pictures of how to settup Denon DN-S1200, Denon Mixer DNX120, and Virtual DJ Mac version 5.0.8.

I had so much trouble finding out how to set them up, luckily I found the help of one our fellow Virtual DJ board member who led me In the right direction.














To settup Virtual DJ Mac and Denon DN-S1200 soundcards with DNX120 mixer you need to create an aggregate.

http://www.apple.com/pro/techniques/aggregateaudio/





If you click on the pic you will see exactly how to set up both soundcard for virtual DJ Mac. Good luck!








Dynacord D12 grill removal and presettings.

The Dynacord DSP 244 Is the Ultimate Signal sound Processor for my Passive Dynacord D-lite 2000 System Two D-lite 2000 D12 and 1 D-lite Sub115 and one EV SB122 sub

Settings d12-sub115-sb122.ds - 0.00MB



I actually use bootcamp window to use ths setting on the Dynacord crossmax software. At this point Dynacord only has the PC version.

Instruction how to use the new software Iris with your Dynacord DSP244 or EV Dx38: 1- Open the Iris software and click on device and choose the the DSP 244 or DX38 and drag It to the right In the large gray area of the software. 2-Right-click On the computer Icon and choose option modify properties, when the Properties for DXserial_1 appears line name Protocol double click in the value area change that value to 232, next double click on the COM option and change the value to whatever the value is in the Ports(COM&LPT) on your PC 9PORTs(COM&LPT). 3-click online option online iption and choose Read current settings from connected devices, and click transfer 4- Now double click on the DSp244 Icon and go to the lower right side of the the DSP244 userpanel and voila the Setup & Control DSP244 appears.

Dynacord D12 front removal:

pull each side of the side of the sponge on the speaker grill, and you will see the screws to remove the screws. Side note, becarefull when peeling the side sponge not to peel the whole sponge only the sides. The sides are made of velcro. Warning, this should only be done after warranty expiration.




My Book Home Edition 500 GB

` Karaoke Tutorial
[URL=http://img530.imageshack.us/my.php?image=modernsounddynacorddsppxv5.jpg]

All of our software requires the Microsoft .NET Framework v1.1. If you are using Internet Explorer, it has detected that you do not have it installed.

Download the Microsoft .NET Framework Version 1.1 Redistributable Package
MP3+G Toolz
Prerequisites (Must have before installing):

Download Microsoft DirectX 9.0C (32.2 MB) - You must install to playback files.

Download Microsoft Windows Media Player 10 (12.1 MB) - You must install to playback files.

Troubadour Karaoke Lite Home Edition (1.21 MB) - You must install to playback files. See http://troubadour-karaoke.com/products/lite-he.html for more details.

Download MP3+G Toolz 4 (3.13 MB)


Important: If you got this software from a website other than this one, please do not install it. Download from here only.

We are no longer supporting version 3 of our software. Please uninstall version 3 and install version 4.

To upgrade to a new version of 4.x, please uninstall first, then install after downloading from this site.


How to convert CDG (karaoke disks) to play in VDJ
In order to copy the lyrics portion of a karaoke track, you should have a CD/DVD burner that WILL read RAW Sub code Data. 99.9% of all Plextor Brands can read this data.

Settings Audiograbber:
General:
Pick a Directory where you want the files saved
Naming, click “Advanced” button and insert “%2-%3” (to work with Toolz)
Use ASPI
Rip Method “Dynamic Synch Width”
DAE Speed (Slower is better especially on scratched CDs)

Audio Encoding
Check “Direct Rip and Encode to MP3 file”
Uncheck “ID3v1 Tag”
Uncheck “Rip All Tracks Before Encoding”
Check “Internal Encoder”
Select “Fraunhofer IIS MPEG Layer-3 Codec (Professional)”
Mode: YOUR CHOICE

Settings MP3+G Toolz
NOTES: Settings won’t take until you close and re-open Toolz, check after you’ve made these changes. Because of this, I would NOT recommend using Toolz to RIP CDGs… your disks will all be mislabeled.
Click the Options Tab
Select your Auto-Renaming “DISC-TRACK ARTIST – TITLE” works well
Check the following four of five boxes:
Auto-Rename Zip Files (Requires Internet Access) IMPORTANT!
Recurse Folders
Delete The Old Files After Processing IMPORTANT!
Rename Bin Files During Auto-Renaming Before Conversion (important, not sure)

Click on the Zip Compression
Select “5 – Default Compression”
IMPORTANT NOTE: You have MANY choices here surrounding how MUCH compression. DO NOT PICK ANYTHING ELSE! If you do, you are likely to make the file non-functional in this or any other application!

Making your first tracks:

Insert a CDG into your burner
Open Audiograbber
Click “Refresh” (every time you insert a new CDG)
Type the disk number in the Album Box (IMPORTANT, use the KJPro Label here, that way when you use Toolz later, you will have the correct artist and title in your file)
Click “CD” then “Grab CDG Tracks (Karaoke)” then “Grab to .cdg + compressed file”
Wait….
NOTE: Audio Grabber in tests has defeated Media Cloq AND Multisession CDs without any unnecessary gimmicks.

Insert next CDG and Repeat as necessary from “Refresh”
You can do this with all your CDs or one at a time as necessary. If a singer brings a CDG to you show and your computer can handle it (Usually a Dual Core WILL), you can insert his/her CD on the fly and copy the track/tracks to a temporary file one at a time. If the disk is a Media Cloq, you may have to import the whole CD.

Organize Your Collection for VDJ:

Right Mouse Click on the Folder where you put all these karaoke tracks in.
Click on “MP3+G Toolz .Net 4”

In Toolz:
Click “Convert Audio+G to Zip”
Wait… Maybe go to bed if there are a lot of files.
Confirm that all your files are labeled correctly. If your file doesn’t have the Artists and Title information, either you’ve labeled the Disk incorrectly, or your internet isn’t working. Confirm, rename and try again with the “Rename Files From Internet Button” NOTE: This will check EVERY FILE in the folder AGAIN, so if you have only a FEW mislabeled disks, create a sub-folder and paste them in there and run Toolz on that folder.


Toolz labels disks correctly 99% of the time. Some brands with vocals (Pocket Songs for example but not Pop Hit or Top Hits Monthly) often end up mislabeled with the phrase, “w/vocal” This is KJPro’s error, nothing else.

Once you have .zip files it is just a matter of loading them into Virtual DJ.
Make sure you ADD the “zip” to the \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"EXTENSION\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" tab in Virtual DJ and assign the karaoke reader.

I know of two CDG brands (not currently made) that do NOT play correctly when converted to the computer, SAVA (P maybe as well) and All Hits. All Hits WILL play the song and lyrics correctly, but the opening screen won’t be displayed properly. This is in natural issue with VDJ that may be addressed.

I have over 32,000 songs, 65% of them were created this way, and 98% were labeled this way. They all work fine in VDJ.

Good Luck!



1. click on config

2. click on codecs

3. cdg karaoke cdg/zip decoder

MP3 karaoke cdg/zip decoder

Zip karaoke cdg/zip decoder


Maya 44
[URL=http://img518.imageshack.us/my.php?image=maya442po7.jpg]

BELKIN Hi-Speed USB 2.0 and FireWire 6-Port Hub for Mac mini Model F5U507