NUMARK V7





for VirtualDJ 8.0
Last Update : July 2016
 

SETUP


STEP 1. Connections


  • Connect each V7 with a USB port of your computer using the provided USB cable.

  • Use a pair of RCA cables to connect each V7 Output to an Input Channel of a mixer. Any analogue or digital mixer can be used.

  • Connect your amplifier or amplified speakers to the Master Output of a mixer

  • Power on each V7, your mixer and your amplifier.


STEP 2. Firmware & Drivers


For both Windows and Mac OSX :
Install the necessary drivers, depending on your Operating System from https://www.numark.com/product/v7

STEP 3. VirtualDJ 8 Setup


Download and install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)

Once VirtualDJ 8 is opened, a Login Window will appear. Login with your virtualdj.com account.

A Pro Infinity or a Pro Subscription License is required to use the Numark V7 with VirtualDJ 8. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ 8.
http://www.virtualdj.com/buy/index.html


A detection window will appear next verifying the proper connection.

Click on the Use Soundcard button and VirtualDJ will automatically apply the necessary Audio configuration.

Click OK.


The unit is now ready to operate.



MIDI Operation


The unit should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list.
The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.

Note. Each V7 unit (if more than 1 is connected) will be additionally displayed in this window, and any modifications in the mapping file will affect all units.

Find more details at http://www.virtualdj.com/wiki/VDJ8script.html


AUDIO Setup


The unit has a pre-defined Audio configuration for External mixer setup (as per the connections diagram above) and a special button in the AUDIO tab of Config to provide that.
For alternative Audio configurations please refer to Audio Settings of VirtualDJ 8 http://www.virtualdj.com/manuals/virtualdj8/settings/audiosetup.html


For further VirtualDJ settings and features please refer to the User Guide of VirtualDJ 8.
http://www.virtualdj.com/manuals/virtualdj8/index.html

 

CONTROLS





KEY

ACTION

1 SYNC
Match BPM and Phase with the opposite deck
2 CUE
Sets a Temporary Cue when paused and previews track from Cue while pressed Jumps track to Cue point when playing
3 PLAY
Play-pauses deck
4 DELETE
Sets the numbered HotCue buttons (1-5) to Delete mode when enabled
5 HOTCUES (1-5)
Assign a Hotcue 1 to 5 or jump to the position of the Hotcue (if assigned).
When in Delete mode, delete the assigned Hotcue
6 PITCH BEND
Temporary slow-down/speed-up track's speed. When released, the track will resume to the tempo designated by the Pitch fader.
7 PITCH
Adjust the Tempo (BPM) of the track.
8 RANGE
Select the next available % range for the Pitch fader
9 MASTER TEMPO
When enabled, the Key of the track will remain intact when the Tempo of the track changes
10 DECK SELECT
Set this switcher to USB to control
11 JOG
Motorized Platter
12FX ON
Turns the selected Effect on/off
13FX MIX
Adjust the 1st Parameter of the selected Effect
14FX PARAM
Adjust the 2nd Parameter of the selected Effect
15FX SEL
Selects the previous/next available Effect
Push to (un-)dock the FX GUI of the selected Effect in Browser
16TAP
Tap this button on Tempo to manually calculate the BPM of the track
17REVERSE/BLEEP
Set switcher to REVERSE to play the track in reverse.
While in BLEEP position, track will play n reverse and once released, track will resume playing from the position it would havebeen if the reverse mode was never enabled (censor)
18 STOP TIME
Adjust the time required for the platter to completely stop when paused. When in minimum position, the platter will stop instantly
19 START TIME
Adjust the time required for the platter to catch full speed when playback is started. When in minimum position, the platter will start instantly
20 MOTOR OFF
When disabled, platter's motor will not be functioning
21 LOOP /2
Halves the size of the Loop
22 LOOP x2
Doubles the size of the Loop
23 LOOP <
Moves the triggered Loop backwards in time by 1 beat
24 LOOP >
Moves the triggered Loop forward in time by 1 beat
25 LOOP IN
In Manual mode : Sets a Loop In (Start) point for a manual loop.
In Auto-Loop mode : Triggers a Loop of 1 beat in size
26 LOOP OUT
In Manual mode : Sets a Loop Out (End) point for a manual loop. Exits the Loop when enabled
In Auto-Loop mode : Triggers a Loop of 2 beats in size
27 LOOP SELECT
In Manual mode : Turns the selected Loop on/off.
In Auto-Loop mode : Triggers a Loop of 4 beats in size
28 RELOOP
In Manual mode : Enables the last triggered loop (reloop)
In Auto-Loop mode : Triggers a Loop of 8 beats in size
29 LOOP CONTROL
Enables/disables Smart Loop mode
30 LOOP MODE
Toggles between Auto and Manual Loop mode
31 NEEDLE STRIP
Touch-strip to fast search (seek) through track's time
32 BEAT DIFF BAR
Indicates the Beat difference of the left and right decks. When in middle (white led lights on), both decks are synced. The red leds indicate a beat difference of 25, 50, 75 and 100% of a beat difference
33 BROWSE
Scrolls through folders or files depending on the focused Browser window
When focus is on the Folders list, push to set focus to Songs list if Folder has tracks, or expand and seect next sub-folder if folder has no tracks.
When in Songs List or Sideview, push to load the selected track to theDeck
34 BACK
Sets focus to the previous Browser window
35 FWD
Sets focus to the next Browser window
36 CRATES
Sets focus to the Folders List of Browser. If focus in on the Folders list, opens/closes sub-folders
37 PREPARE
Sets focus to the Sideview Browser window. If focus is on the Sideview, cycles through the available views (Automix, Sidelist, Karaoke, Sampler and Clone)
38 FILES
Sets focus to the Songs List of Browser
39 LOAD A
Loads the selected track from the Browser to the Left assigned Deck
40 LOAD PREPARE
Loads the selected track from the Browser to the Automix List of Sideview
41 LOAD B
Loads the selected track from the Browser to the Right assigned Deck







For further Technical features and specifications, visit

Numark V7
Product's Page







Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.