The functionality explained in this manual applies to 3 models:
- Mixstream Pro
- Mixstream Pro+
(same as Mixstream Pro but has a buil-in chipset to allow Amazon Music in stand-alone mode)
- Mixstream Pro GO
(same as the previous models but with built-in battery)
Firmware & DriversFirmware
: Update the firmware Engine OS of the unit to the latest available version from https://enginedj.com/downloadsDrivers : (Windows only)
Download and install the latest Windows
drivers from :https://www.numark.com/product/mixstream-pro
(for Mixstream Pro )https://www.numark.com/product/mixstream-pro-plus
(Mixstream Pro Plus)https://www.numark.com/product/mixstream-pro-go
(for Mixstream Pro GO)
If the Windows driver fails to install, please follow the instructions from https://support.inmusicstore.com/en/support/solutions/articles/69000832269-numark-mixstream-pro-driver-will-not-installNo driver
is necessary to be installed on Mac
OSX computers. Note Due to Denon SDK incompatibility, the screens will be operational on Mac OSX 10.14 or later.
Switch to Computer mode
When the Mixstream Pro (Plus/GO) is powered on, it will be set to Standalone mode. To switch to Computer mode
and control VirtualDJ you need to ...
- press the button with the Settings
icon on the Mixstream Pro (at the right side of the screen) or slide down the screen.
- select Source
from the Mixstream Pro display], then press on the Computer icon
at the top of the screen.
- allow a few seconds for the Computer mode to initialize (Computer mode should be displayed on screen)
VirtualDJ SetupDownload and install VirtualDJ from https://www.virtualdj.com/download/index.html (in case you have not done already)
Once VirtualDJ is opened, a Connect Window will appear. Login with your virtualdj.com account’s credentials.
A Pro Infinity or a Pro Subscription License is required to use the Numark Mixstream Pro. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ.
A detection window will appear next verifying proper connection.
Select the Mixstream Pro button in order VirtualDJ to apply the pre-defined audio configuration (speakers need to be connected to the rear side of the unit in this case), or Computer if you don't have any speakers to connect to the Mixstream Pro and need to output sound from the default sound card of your computer.
Click to OK
The name could be different if a Pro GO is connected
The device is now ready
The device should be visible in the MAPPING tab of VirtualDJ Settings and the “factory default
” available/selected from the Mappings drop-down list. The name could be different if a Pro GO is connected
The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.
Find more details at https://www.virtualdj.com/wiki/VDJscript.html
The unit has a pre-defined Audio setup and a special button
in the AUDIO tab of VirtualDJ Settings to provide that. The name of the driver could be different if a Pro GO is connected
See also Inputs & Recording.
For further software settings please refer to the User Guide of VirtualDJ. https://www.virtualdj.com/manuals/virtualdj/index.html
The functionality of each button, knob and connection per section (as shown in the image above) will be explained in detail in the next chapters and applies to both Mixstream Pro and Mixstream Pro Plus modelsS SHIFT
: Press and hold this button to access secondary functions of other controls on the Mixstream ProA Mixer ControlsB Deck ControlsC PadsD Effects & Browser ControlsE Output ControlsF DisplayG Front & Rear
BUILT-IN SPEAKERS & OUTPUTS
The Numark Mixstream Pro offers high quality built-in speakers located at the front panel. Starting from Engine OS 2.4 this output is not part of the USB Audio interface. The audio signal is taken from the Master Output before the Main Volume (pre-fader) and its Volume control at the top-right is independent. The speakers are the ultimate, convenient solution for practicing, live streaming, video content creation, and personal monitoring when connected to a larger sound system.
The Numark Mixstream Pro offers a Microphone input and a Volume control knob at the front panel. The Microphone input is not part of the USB Audio Interface and is routed directly to the Main output, thus is not included in VirtualDJ Audio setup but its signal will be recorded along with your Mix.
Starting from Engine OS 2.4, the Mixstream Pro offers a special record input, so no special steps are required to record and/or broadcast your Mix and the Microphone using VirtualDJ, as long as the default Audio setup is applied with the Input Channels 1,2 assigned as record
loopback input. Numark Mixstream Pro - Default Audio Setup The name of the driver could be different if a Pro GO is connected
For further Technical features and specifications, visit Numark MIXSTREAM PRO
Product's Page Numark MIXSTREAM PRO PLUS
Product's Page Numark MIXSTREAM PRO GO
Hardware Integration Department 2023 - ATOMIX PRODUCTIONS Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.