djebou
i need help really bad. They stole my old labtop and i bought a new one from gateway with windows vista. but the bcd2000 wouldn't work.
how can i fix this problem
how can i fix this problem
Inviato Fri 21 Dec 07 @ 2:49 am
sbangs
you will need the vista drivers from their website if you have these you may have a hardware conflict on your machine
is it detected at all by windows how is it not working?
check this link http://www.helpwithpcs.com/upgrading/change-irq-settings.htm
for info on how to avoid conflicts
is it detected at all by windows how is it not working?
check this link http://www.helpwithpcs.com/upgrading/change-irq-settings.htm
for info on how to avoid conflicts
Inviato Fri 21 Dec 07 @ 12:07 pm
djebou
windows detects it but when i select it remote control, it makes a red ring around it. It worked one time yesterday but after turinng off the labtop for few minutes and turn it back up it starts doing the same thing again. It will show up in the sound setup and remote cntrol but will have a red line around it when activated.
Inviato Fri 21 Dec 07 @ 1:37 pm
sbangs
sounds like you do have a conflict , if its working intermitently
if your are not sure post your irq list here and we will help you with it
if your are not sure post your irq list here and we will help you with it
Inviato Fri 21 Dec 07 @ 3:26 pm
djebou
This is my IRQ list
(ISA)0 system timer
(ISa)1 standard 101/102-key or microsoft natural ps/2 keyboard
(isa)4 wacom serial pen tablet
(isa)8 system cmos/real time clock
(isa)100 microsoft ACPI-compliant system
(isa)101 ''
(isa)102 ''
(isa)103 ''
(isa)104 ''
""" 105 ''
106 ''
107 ''
108 ''
109 ''
11 Tablet pc buttons
110 Microsoft ACPI Compliant system
111 ''
112 ''
113 ''
114 ''
115 ''
116 ''
117 ''
118 ''
119 ''
12 Synaptics PS/2 Port TouchPad
120 Microsoft ACPI Compliant System
121 ''
122 ''
123 ''
124 ''
125 ''
126 ''
127 ''
128 ''
129 ''
13 Numeric data processor
130 Microsoft ACPI Compliant System
131 ''
132''
133 ''
134 ''
135 ''
136 ''
137 ''
138 ''
139 ''
14 ATA Channel0
140 Microsoft ACPI Compliant System
141 ''
142 ''
143 ''
144 ''
145 ''
146 ''
147 ''
148 ''
149 ''
150 ''
151 ''
152 ''
153 ''
154 ''
155 ''
156 ''
157 ''
158 ''
(ISA)190 ''
80 ''
(ISA) 99 ''
(PCI) 10 Intel(R)ICH8 Family SMBus Controller - 283E
(PCI) 16 Intel(R)ICH8 Family USB Universal Host Controller - 2834
(PCI) 16 Mobile Intel(R) 965 Express Chepset Family
(PCI) 17 Intel(R)ICH8 Family PCI Root Port1 - 283F
(PCI) 17 SDA Standard Compliant SD Host Controller
(PCI) 17 Texas istrument PCIxx12 Cardbus Controller
(PCI) 17 Texas Instrument PCIxx12 Integrated FlashMedia Controller
(PCI) 18 Intel(R) ICH8 Family USB Universal Host Controller - 2832
(PCI) 18 Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
(PCI) 18 Texas Instrument OHCI Compliant IEEE 1394 Host Controller
(PCI) 19 Intel(R) 82801HEM/HBM SATA AHCI Controller
(PCI) 19 Intel(R) ICH8 Family USB Universal Host Controller - 2831
(PCI) -2 Intel(R) 82566MC Gigabit Network Connection
(PCI) 21 Intel(R) ICH8 Family USB Universal Host Controller - 2835
(PCI) 22 High Definition Audio Controller
(PCI) 23 Intel(R) ICH8 Family USB Universal Host Controller - 2830
(PCI) 23 Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
(PCI) -3 Intel(R) PRO/Wireless 3945ABG Network Connectio
Thank you for you help i need to get this to work real bad
(ISA)0 system timer
(ISa)1 standard 101/102-key or microsoft natural ps/2 keyboard
(isa)4 wacom serial pen tablet
(isa)8 system cmos/real time clock
(isa)100 microsoft ACPI-compliant system
(isa)101 ''
(isa)102 ''
(isa)103 ''
(isa)104 ''
""" 105 ''
106 ''
107 ''
108 ''
109 ''
11 Tablet pc buttons
110 Microsoft ACPI Compliant system
111 ''
112 ''
113 ''
114 ''
115 ''
116 ''
117 ''
118 ''
119 ''
12 Synaptics PS/2 Port TouchPad
120 Microsoft ACPI Compliant System
121 ''
122 ''
123 ''
124 ''
125 ''
126 ''
127 ''
128 ''
129 ''
13 Numeric data processor
130 Microsoft ACPI Compliant System
131 ''
132''
133 ''
134 ''
135 ''
136 ''
137 ''
138 ''
139 ''
14 ATA Channel0
140 Microsoft ACPI Compliant System
141 ''
142 ''
143 ''
144 ''
145 ''
146 ''
147 ''
148 ''
149 ''
150 ''
151 ''
152 ''
153 ''
154 ''
155 ''
156 ''
157 ''
158 ''
(ISA)190 ''
80 ''
(ISA) 99 ''
(PCI) 10 Intel(R)ICH8 Family SMBus Controller - 283E
(PCI) 16 Intel(R)ICH8 Family USB Universal Host Controller - 2834
(PCI) 16 Mobile Intel(R) 965 Express Chepset Family
(PCI) 17 Intel(R)ICH8 Family PCI Root Port1 - 283F
(PCI) 17 SDA Standard Compliant SD Host Controller
(PCI) 17 Texas istrument PCIxx12 Cardbus Controller
(PCI) 17 Texas Instrument PCIxx12 Integrated FlashMedia Controller
(PCI) 18 Intel(R) ICH8 Family USB Universal Host Controller - 2832
(PCI) 18 Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
(PCI) 18 Texas Instrument OHCI Compliant IEEE 1394 Host Controller
(PCI) 19 Intel(R) 82801HEM/HBM SATA AHCI Controller
(PCI) 19 Intel(R) ICH8 Family USB Universal Host Controller - 2831
(PCI) -2 Intel(R) 82566MC Gigabit Network Connection
(PCI) 21 Intel(R) ICH8 Family USB Universal Host Controller - 2835
(PCI) 22 High Definition Audio Controller
(PCI) 23 Intel(R) ICH8 Family USB Universal Host Controller - 2830
(PCI) 23 Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
(PCI) -3 Intel(R) PRO/Wireless 3945ABG Network Connectio
Thank you for you help i need to get this to work real bad
Inviato Tue 25 Dec 07 @ 9:29 pm
sbangs
i noticed that your processor/graphics, share the same irq as one of your usb ports on irq 16.
See if you can alter these two :)
See if you can alter these two :)
Inviato Wed 26 Dec 07 @ 3:39 pm
djebou
i try changing it but the automatic setting is grayed out. is there any other way to change it?.
It also ssays "no conflict"
It also ssays "no conflict"
Inviato Thu 27 Dec 07 @ 9:21 pm
discobrian24
I think what Sky is tryin to tell u is to move whatever you have plugged into the usb that is sharing to a different usb port. Try that and see. Also are u usin a usb mouse and keyboard?
Inviato Thu 27 Dec 07 @ 10:24 pm
sbangs
yes try another port ,if it is not possible to change , you can also alter the reservation for devices in the bios of your computer
hit F1 or F2 or DEL when booting and look for hardware or hardware assignments.
On this screen you will see a list of hardware detected on you machine and you can assign a new number.
hit F1 or F2 or DEL when booting and look for hardware or hardware assignments.
On this screen you will see a list of hardware detected on you machine and you can assign a new number.
Inviato Fri 28 Dec 07 @ 4:29 am
Rune (DJ-In-Norway)
Also try this (something Behringer also says you MUST do) when using BCD2000 controller:
- Turn OFF wireless, bluetooth, lan - they tax your system resources and BCD2000 is not made to handle that
The BCD2000 is also very sensitive to background apps that tax the system, such as MSN, anti-virus programs and similar.
Bottom line is, that the BCD2000 needs a STEADY flow of audio data, or else it will crash/freeze/stop working (driver/chip issue with the controller)
And IRQ conflict like Sky and the others mention above, where the BCD2000 (usb port) share IRQ with other hardware can also make it not work, since it will interrupt the flow of audio data
Inviato Fri 28 Dec 07 @ 7:39 am
MR MANDINGO
i have the same problem also the bcd2000 worked once after system restart i havent been able to get it to work sinc
version 5 with vista any help will be help full
version 5 with vista any help will be help full
Inviato Sun 30 Dec 07 @ 8:43 pm