Hardware Manuals


Behringer - CMD DV-1  

Controlli





KEY

ACTION

1 BUTS 1-8
Buttons 1-8 offer different functionality depending on the selected mode
In Slicer mode : The 8 numbered buttons repeat a Slice of the 8-beat pattern
In Hotcues mode (default) : Assign a Hotcue 1 to 8 at the current position or jump to the Hotcue point if assigned
In Hotcues store mode: Assign a Hotcue 1 to 8 at the current track's position.
In Hotcues Delete mode : Delete the assigned Hotcue point
2 BUT MODES
SLICER : Sets Buttons 1-8 to Slicer mode
ERASE : Sets Buttons 1-8 to Hotcues Delete mode
STORE : Sets Buttons 1-8 to Hotcues Store mode
When all SLCER, ERASE and STORE buttons are off, the Buttons 1-8 are in default Hotcues mode

PHRASE : When enabled, the LOOP buttons offer different Auto-Loop sizes
3 LOOPS
Trigger Auto Loops from 1/16 to 1/2 beats
When PHRASE is pressed, buttons trigger Auto-Loops of 1, 4, 8 and 16 beats
4 FOCUS
Sets A,B,C,D buttons to Assign Deck mode
5 MASTER
Sets A,B,C,D buttons to Master mode
6 DOUBLE
Sets A,B,C,D buttons to Default mode
7 A,B,C,D
In Default mode :
A : Resets Filter to zero
B : Sets track's Key to the original value (reset)
C : Enable/disable Loop
D : Enable/disable Loop
In Deck Assign mode : Buttons assign unit to Decks 1,2,3 or 4
8 LOW KNOB1
Applies a High/Low Pass filter to the assigned deck
9 LOW KNOB2
Adjusts the Key of the track loaded to the assigned deck
10 LOW KNOB3
Halves/doubles the size of the loop of the assigned deck
11 LOW KNOB4
When Loop is enabled, moves the loop backwards/forward in time on the assigned deck


FX UNITs


Both Top and Bottom FX Units offer exactly the same functionality, providing the ability to select which FX Slot each unit will control

12 ON/SEL
Enables/disables the selected Effect of the 1st FX Slot on the assigned deck
13 ON/1
Enables/disables the selected Effect of the 2nd FX Slot on the assigned deck
14 ON/2
Enables/disables the selected Effect of the 3rd FX Slot on the assigned deck
15 ON/3
Triggers the selected Video Transition
16 KNOB 1
FX1 enabled : Selects the Effect for the 1st FX Slot
FX2 enabled : Selects the Effect for the 2nd FX Slot
FX3 enabled : Selects the Effect for the 3rd FX Slot
FX4 enabled : Bottom FX unit -Selects the Video Transition
FX4 enabled : Top FX unit -Selects the Master Video Effect
17 KNOB 2
FX1 enabled : Adjusts the 1st Parameter of the selected Effect of the 1st FX Slot
When FX1 is pressed, adjusts the 4th Parameter of the selected Effect of the 1st FX Slot

FX2 enabled : Adjusts the 1st Parameter of the selected Effect of the 2nd FX Slot
When FX2 is pressed, adjusts the 4th Parameter of the selected Effect of the 2nd FX Slot

FX3 enabled : Adjusts the 1st Parameter of the selected Effect of the 3rd FX Slot
When FX3 is pressed, adjusts the 4th Parameter of the selected Effect of the 3rd FX Slot

FX4 enabled : Bottom FX unit - Adjusts the 1st Parameter of the selected Video Transition
When FX4 is pressed, adjusts the 4th Parameter of the selected Video Transition
FX4 enabled : Top FX unit - Adjusts the 1st Parameter of the selected Master Video Effect
When FX4 is pressed, adjusts the 4th Parameter of the selected Master Video Effect
18 KNOB 3
FX1 enabled : Adjusts the 2nd Parameter of the selected Effect of the 1st FX Slot
When FX1 is pressed, adjusts the 5th Parameter of the selected Effect of the 1st FX Slot

FX2 enabled : Adjusts the 2nd Parameter of the selected Effect of the 2nd FX Slot
When FX2 is pressed, adjusts the 5th Parameter of the selected Effect of the 2nd FX Slot

FX3 enabled : Adjusts the 2nd Parameter of the selected Effect of the 3rd FX Slot
When FX3 is pressed, adjusts the 5th Parameter of the selected Effect of the 3rd FX Slot

FX4 enabled : Bottom FX unit - Adjusts the 2nd Parameter of the selected Video Transition
When FX4 is pressed, adjusts the 5th Parameter of the selected Video Transition
FX4 enabled : Top FX unit - Adjusts the 2nd Parameter of the selected Master Video Effect
When FX4 is pressed, adjusts the 5th Parameter of the selected Master Video Effect
19 KNOB 4
FX1 enabled : Adjusts the 3rd Parameter of the selected Effect of the 1st FX Slot
When FX1 is pressed, adjusts the 6th Parameter of the selected Effect of the 1st FX Slot

FX2 enabled : Adjusts the 3rd Parameter of the selected Effect of the 2nd FX Slot
When FX2 is pressed, adjusts the 6th Parameter of the selected Effect of the 2nd FX Slot

FX3 enabled : Adjusts the 3rd Parameter of the selected Effect of the 3rd FX Slot
When FX3 is pressed, adjusts the 6th Parameter of the selected Effect of the 3rd FX Slot

FX4 enabled : Bottom FX unit - Adjusts the 3rd Parameter of the selected Video Transition
When FX4 is pressed, adjusts the 6th Parameter of the selected Video Transition
FX4 enabled : Top FX unit - Adjusts the 3rd Parameter of the selected Master Video Effect
When FX4 is pressed, adjusts the 6th Parameter of the selected Master Video Effect
20 FX1
Assigns Top or Bottom FX unit to control the 1st FX slot
21 FX2
Assigns Top or Bottom FX unit to control the 2nd FX slot
22 FX3
Assigns Top or Bottom FX unit to control the 3rd FX slot
23 FX4
Assigns Bottom/Top FX unit to control the Video Transition and Master Video Effect respectively






For further Technical features and specifications, visit

Behringer CMD DV-1
Product's Page





Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.