Hardware Manuals


Novation - Launchpad Pro  

Modalità Effetti


Press the top NOTE button, to set the device to Effects mode.
In this mode, the 32 left-side Pads along with the 4 left-side bottom buttons control the Effects on Left deck and the right-side pads and buttons, the Effects on the Right deck.



PADS


Press a pad to adjust the value of the Parameter of the selected Effect. The speed that the value will increase/decrease to the set value, depends on the velocity (how hard the pad is initially pressed).
The leds of the pads inside a column represent the current value of the Effect parameter in 2 patterns. Most of the Effect parameters have their "off" value at the minimum 0% and those get the "volume-style" pattern. Some others, have their "off" value at the middle, and those get the "pan-style" pattern where the 2 middle leds represent the center/off value.

KEY

ACTION

SHIFT ACTION

PAD COLUMN 1
Adjust the 1st Parameter of the selected Effect on Left deck
PAD COLUMN 2
Adjust the 2nd Parameter of the selected Effect on Left deck
PAD COLUMN 3
Adjust the 3rd Parameter of the selected Effect on Left deck
PAD COLUMN 4
Adjust the 4th Parameter of the selected Effect on Left deck
PAD COLUMN 5
Adjust the 1st Parameter of the selected Effect on Right deck
PAD COLUMN 6
Adjust the 2nd Parameter of the selected Effect on Right deck
PAD COLUMN 7
Adjust the 3rd Parameter of the selected Effect on Right deck
PAD COLUMN 8
Adjust the 4th Parameter of the selected Effect on Right deck



TOP BUTTONS


KEY

ACTION

SHIFT ACTION

T1 ARROW UP
Select the previous available Mixer panel in the default VirtualDJ GUI (Audio mixer, Video, Scratch panel and Master panel)
T2 ARROW DOWN
Select the next available Mixer panel in the default VirtualDJ GUI (Audio mixer, Video, Scratch panel and Master panel)
T3 ARROW LEFT
Moves the Crossfader to the left by 5% each time its pressed. Hold down to repeat the movement every 100 ms
Moves the crossfader to the far more left position
T4 ARROW RIGHT
Moves the Crossfader to the right by 5% each time its pressed. Hold down to repeat the movement every 100 ms
Moves the crossfader to the far more right position
T5 SESSION
Selects the Sampler (default) mode
T6 NOTE
Selects the (current) Effects mode mode
T7 DEVICE
Selects the Mixer mode mode
T8 USER
Selects the User's mode mode



LEFT BUTTONS


KEY

ACTION

SHIFT ACTION

L1 SHIFT
Press and hold down to access secondary actions, as described in the SHIFT ACTIONS column
L2 το L8
Not assigned


RIGHT BUTTONS


KEY

ACTION

SHIFT ACTION

R1 το R8
Not assigned


BOTTOM BUTTONS


KEY

ACTION

SHIFT ACTION

B1 RECORD ARM
Enable/disable the selected Effect on Left Deck
B2 TRACK SELECT
Select the previous available Effect for Left Deck
B3 MUTE
Select the next available Effect for Left Deck
B4 SOLO
Open/close the FX GUI of the selected Effect for Left Deck (a small window is attached to the right side of the Browser with all the Parameters and details of the Effect)
B5 VOLUME
Enable/disable the selected Effect on Right Deck
B6 PAN
Select the previous available Effect for Right Deck
B7 SENDS
Select the next available Effect for Right Deck
B8 STOP CLIP
Open/close the FX GUI of the selected Effect for Right Deck (a small window is attached to the right side of the Browser with all the Parameters and details of the Effect)



Modalità Mixer