Accesso rapido:  

Forum: General Discussion
Topic: Script School - Page: 28.2
locodog wrote :
I've been back for 2 minutes and I'm already getting irritated.

set varname +1 is wasteful in your circumstance, use cycle varname 4
that gets rid of your bracketed wrap round bit, after that
( var varname 0 ? deck 1 select : var varname 1 ? deck 2 select : ... ) & whatever



so you can see what I mean:
pod USER/CUSTOM BUTTON
set '$DJM_Shift' 1 &
deck master repeat_start '$RP_MDJ_ColorFX' 250ms &
(deck master repeat_start_instant '$RP_ColorFX' 40ms 4 &
  deck 2 &
  cycle '$SelectDeckColorFX' 4 &
  var_list &
  (var '$SelectDeckColorFX' 0 ? deck 1 :
    var '$SelectDeckColorFX' 1 ? deck 2 :
      var '$SelectDeckColorFX' 2 ? deck 3 :
        var '$SelectDeckColorFX' 3 ? deck 4) &
  (var 'ColorFXSelectWindow' 1 ?
    set 'ColorFXSelectWindow' 0 &
    (effect_select 'colorfx' ?
      nothing :
      effect_select 'colorfx' &
      set 'WindowColorFX' 1) &
    (repeat_start 'RD_ColorFXSelect' 3000ms 1 &
    effect_select 'colorfx' ?
      effect_select 'colorfx' &
      set 'WindowColorFX' 0 :
      nothing) :
    nothing) &
  (var $DJM_Shift 1 ?
    nothing :
    var 'WindowColorFX' 1 ?
      effect_select 'colorfx' ?
        effect_select 'colorfx' &
        set 'WindowColorFX' 0 : 
        nothing))


pod USER/CUSTOM SLIDER
set 'SliderColorFX' &
var '$DJM_ColorFX' 0 ?
    var '$DJM_Shift' 1 ?
      filter_slider 50% &
      effect_select 'colorfx' &
      set 'ColorFXSelectWindow' 1 :
      filter_slider


This is how the deck2 popup window works when selecting a custom slider.
Then remove the "deck 2" custom button from the script.
It won't work.
How to cycle through all decks?
 
Inviato Thu 06 Oct 22 @ 6:46 pm
locoDogPRO InfinityModeratorMember since 2013
not reading, lost interest,
deck X
on its own does nothing, it needs to be followed with the select verb.
 
Inviato Thu 06 Oct 22 @ 10:30 pm
locodog wrote :
not reading, lost interest,
deck X
on its own does nothing, it needs to be followed with the select verb.


Why? Did I write something inappropriate?

deck X select - selects a deck and at the same time makes it the default working deck.

deck X - only specifies the deck with which the script will work.
Deck x is not in the LIST OF VERBS, but it works like this. However, I found it in many scripts.
Try below button
repeat_start_instant '$RP' 3000ms 3 &
deck 1 & play & wait 1000ms & stop &
deck 2 & play & wait 1000ms & stop
 
Inviato Fri 07 Oct 22 @ 7:56 am
mg_1978PRO InfinityMember since 2008
mg_1978 wrote :
hi at all! i would map a button that pushed “holding” 700ms set ‘variable’ 1 while_pressed, not holding make action1:
button= holding 700ms : set ‘variable’ 1 : var ‘variable’ 1 ? set ‘variable’ 0 : action1

but doesn’t work correctly :(
could you help me? thanks


solved:
script is: var ‘variable’ 1 ? up ? set ‘variable’ 0 : nothing : holding 700ms ? set ‘variable’ 1 : action1
 
Inviato Fri 07 Oct 22 @ 11:20 am
hrdnxPRO InfinityMember since 2011
Greetings all
I have this script whic I use to colour code my tracks according to Key Colour. Found it within this site.
It runs automatically, but the (very slight) problem is that when it reaches to a track that is 12B, it stops.
Is there a way to change this behaviour?? I tried modifying the last line with no luck,
TIA


repeat_start 'colorTracks' ? on & repeat_stop 'colorTracks' : off & browser_window "songs" & browser_scroll "top" & repeat_start 'colorTracks' 100ms & browser_scroll 'bottom' ? repeat_stop 'colorTracks' & get_browsed_song 'harmonic' & param_cast 'text' & param_equal '01A' ? browsed_song color '#70ECD4' : param_equal '01B' ? browsed_song color '#00EDC9' : param_equal '02A' ? browsed_song color '#92F0A4' : param_equal '02B' ? browsed_song color '#27EC82' : param_equal '03A' ? browsed_song color '#B1EE86' : param_equal '03B' ? browsed_song color '#85ED4E' : param_equal '04A' ? browsed_song color '#E6E0A2' : param_equal '04B' ? browsed_song color '#E0C86E' : param_equal '05A' ? browsed_song color '#FEC8AC' : param_equal '05B' ? browsed_song color '#FFA279' : param_equal '06A' ? browsed_song color '#FFB3BF' : param_equal '06B' ? browsed_song color '#FF8C93' : param_equal '07A' ? browsed_song color '#FFB4D2' : param_equal '07B' ? browsed_song color '#FF85B4' : param_equal '08A' ? browsed_song color '#EBB7F9' : param_equal '08B' ? browsed_song color '#F087D9' : param_equal '09A' ? browsed_song color '#E7B6F8' : param_equal '09B' ? browsed_song color '#CE93FF' : param_equal '10A' ? browsed_song color '#C0CEFB' : param_equal '10B' ? browsed_song color '#A1B9FF' : param_equal '11A' ? browsed_song color '#94E5F8' : param_equal '11B' ? browsed_song color '#3ED2F8' : param_equal '12A' ? browsed_song color '#50EBF0' : param_equal '12B' ? browsed_song color '#01EDED' : nothing : get_browsed_song 'harmonic' & param_cast 'text' & param_equal '01A' ? browsed_song color '#70ECD4' & browser_scroll +1 : param_equal '01B' ? browsed_song color '#00EDC9' & browser_scroll +1 : param_equal '02A' ? browsed_song color '#92F0A4' & browser_scroll +1 : param_equal '02B' ? browsed_song color '#27EC82' & browser_scroll +1 : param_equal '03A' ? browsed_song color '#B1EE86' & browser_scroll +1 : param_equal '03B' ? browsed_song color '#85ED4E' & browser_scroll +1 : param_equal '04A' ? browsed_song color '#E6E0A2' & browser_scroll +1 : param_equal '04B' ? browsed_song color '#E0C86E' & browser_scroll +1 : param_equal '05A' ? browsed_song color '#FEC8AC' & browser_scroll +1 : param_equal '05B' ? browsed_song color '#FFA279' & browser_scroll +1 : param_equal '06A' ? browsed_song color '#FFB3BF' & browser_scroll +1 : param_equal '06B' ? browsed_song color '#FF8C93' & browser_scroll +1 : param_equal '07A' ? browsed_song color '#FFB4D2' & browser_scroll +1 : param_equal '07B' ? browsed_song color '#FF85B4' & browser_scroll +1 : param_equal '08A' ? browsed_song color '#EBB7F9' & browser_scroll +1 : param_equal '08B' ? browsed_song color '#F087D9' & browser_scroll +1 : param_equal '09A' ? browsed_song color '#E7B6F8' & browser_scroll +1 : param_equal '09B' ? browsed_song color '#CE93FF' & browser_scroll +1 : param_equal '10A' ? browsed_song color '#C0CEFB' & browser_scroll +1 : param_equal '10B' ? browsed_song color '#A1B9FF' & browser_scroll +1 : param_equal '11A' ? browsed_song color '#94E5F8' & browser_scroll +1 : param_equal '11B' ? browsed_song color '#3ED2F8' & browser_scroll +1 : param_equal '12A' ? browsed_song color '#50EBF0' & browser_scroll +1 : param_equal '12B' ? browsed_song color '#01EDED' & browser_scroll +1
 
Inviato Sat 08 Oct 22 @ 12:53 am
locoDogPRO InfinityModeratorMember since 2013
looked ok, try this thinned down version

repeat_start 'colorTracks' ? on & repeat_stop 'colorTracks' : off & browser_window "songs" & browser_scroll "top" & repeat_start 'colorTracks' 100ms & ( get_browsed_song 'harmonic' & param_cast 'text' & 
param_equal '01A' ? browsed_song color '#70ECD4' : 
param_equal '01B' ? browsed_song color '#00EDC9' : 
param_equal '02A' ? browsed_song color '#92F0A4' : 
param_equal '02B' ? browsed_song color '#27EC82' : 
param_equal '03A' ? browsed_song color '#B1EE86' : 
param_equal '03B' ? browsed_song color '#85ED4E' : 
param_equal '04A' ? browsed_song color '#E6E0A2' : 
param_equal '04B' ? browsed_song color '#E0C86E' : 
param_equal '05A' ? browsed_song color '#FEC8AC' : 
param_equal '05B' ? browsed_song color '#FFA279' : 
param_equal '06A' ? browsed_song color '#FFB3BF' : 
param_equal '06B' ? browsed_song color '#FF8C93' : 
param_equal '07A' ? browsed_song color '#FFB4D2' : 
param_equal '07B' ? browsed_song color '#FF85B4' : 
param_equal '08A' ? browsed_song color '#EBB7F9' : 
param_equal '08B' ? browsed_song color '#F087D9' : 
param_equal '09A' ? browsed_song color '#E7B6F8' : 
param_equal '09B' ? browsed_song color '#CE93FF' : 
param_equal '10A' ? browsed_song color '#C0CEFB' : 
param_equal '10B' ? browsed_song color '#A1B9FF' : 
param_equal '11A' ? browsed_song color '#94E5F8' : 
param_equal '11B' ? browsed_song color '#3ED2F8' : 
param_equal '12A' ? browsed_song color '#50EBF0' : 
param_equal '12B' ? browsed_song color '#01EDED' :  )
& browser_scroll 'bottom' ? repeat_stop 'colorTracks' : browser_scroll +1
 
Inviato Sat 08 Oct 22 @ 2:17 am
locodog wrote :
looked ok, try this thinned down version


Where would I put this?
 
Inviato Sat 08 Oct 22 @ 5:42 am
On a custom button, for example.
 
Inviato Sat 08 Oct 22 @ 7:41 am
I was using the original version but, this version is way faster and doesn't hang on different bitrates or formats, cheers @locodog (and good to see you back too)
 
Inviato Sat 08 Oct 22 @ 9:41 am
hrdnxPRO InfinityMember since 2011
Great work as always man
Works perfect now
 
Inviato Sat 08 Oct 22 @ 1:01 pm
Denny DennYo wrote :
On a custom button, for example.
Doesnt seem to let me copy/paste; do I have to type this in?
 
Inviato Sat 08 Oct 22 @ 1:43 pm
Djratedxxx919 wrote :
Denny DennYo wrote :
On a custom button, for example.
Doesnt seem to let me copy/paste; do I have to type this in?



copy and paste no longer works in the new update !!!
 
Inviato Sat 08 Oct 22 @ 1:49 pm
ctrl+v works only rightclick paste doesn't work
 
Inviato Sat 08 Oct 22 @ 2:31 pm
mg_1978PRO InfinityMember since 2008
hi at all, i have mapped a button:

button: mic_rec

and i have understand that at first press starts a mic recorder, second press stop mic recorder…but why at second press mic make off?
for this i have changed mapper to force mic always on:

button: mic_rec on ? mic_rec off & mic on : mic_rec on

but doesn’t work correctly…can you help me for have mic on at mic_rec end?
thanks
 
Inviato Thu 13 Oct 22 @ 6:06 am
djkrysrPRO InfinityMember since 2010
Hi
I am really struggling getting to grips with param_ commands so thought I'd just ask

In the following script
<visual source="get_beat_counter" type="circle">
is there a way to add 1 to the value of 'get_beat_counter' ?
ie if 'get_beat_counter' is equal to 1, 'source' gets the value 2 etc

Thanks
 
Inviato Fri 14 Oct 22 @ 2:25 pm
locoDogPRO InfinityModeratorMember since 2013
& param_add -1

go to the first page of this thread, there's a link to a whole part on param_ manipulations.
 
Inviato Fri 14 Oct 22 @ 3:01 pm
djkrysrPRO InfinityMember since 2010
locodog wrote :
& param_add -1

go to the first page of this thread, there's a link to a whole part on param_ manipulations.


If I understand what you are saying correctly I have modified my script to read

<visual source="get_beat_counter & param_add -1" type="circle">

however that doesn't appear to work, the result is a blank circle (i also copied that expression to a text zone action with the same result (blank), i'm not sure but is it because I am using 'get_beat_counter' rather then 'get var ....' that the script isn't performing the correct math.
I did read other pages of this thread to try & work it out but the scripts quoted were so long I am having trouble isolating the correct syntax for just adding 1 to a 'get' value,
 
Inviato Fri 14 Oct 22 @ 3:45 pm
locoDogPRO InfinityModeratorMember since 2013
oh right it's not direct number, more 0.0-1.0 represented
the minus sign was a purposeful error for you to figure out how to subtract with param_add

you want to add 1/32 or whatever your counter ceiling is, bear in mind when the counter hits the ceiling [actual without manipulation] you need to wrap round to zero
 
Inviato Fri 14 Oct 22 @ 4:17 pm
djkrysrPRO InfinityMember since 2010
Hi
I've tried various things using your instructions (now on page 2 lol) and discovered that in a textzone I can create an action
action ="param_multiply get_beat_counter 16 & param_add 2" that will do what I want, when get_beat_counter is saying 1, the result is 2 etc up to 16=17.
However that won't work in a source= command, but I'm assuming now that the 'source' is expecting a value from 0-1, I will scratch my head to see how I can nudge it up by a factor so it 'appears' to be 1 ahead.
 
Inviato Fri 14 Oct 22 @ 4:24 pm
djkrysrPRO InfinityMember since 2010
Hi
What I have been trying to do is change the beat circle, trying to adjust how the circle fills as the beat progresses cause I would prefer beat 1 to have 1/16 of the circle filled & beat 16 to be a full circle, so I have changed the visual to
"get_beat_counter & param_add 0.06249" (0.625 is 1/16 & I want 16 to be full not off)
It appears to work just wandered if anyone had a scenario that could mess this up.

I will test it & see how it goes & thanks for the help so far LOCODOG.
Thanks again
 
Inviato Fri 14 Oct 22 @ 4:38 pm
60%