MickyMix250
Ok, got to say this is very odd.
Got a Denon MCX8000, plugged in my Shure SM58 and nothing, refuses to work.
Same for my AKG SR40 wireless.
These has been an industry standard mic for decades.
Any ideas?
Got a Denon MCX8000, plugged in my Shure SM58 and nothing, refuses to work.
Same for my AKG SR40 wireless.
These has been an industry standard mic for decades.
Any ideas?
Inviato Tue 27 Aug 19 @ 7:35 pm
kradcliffe
No outpiut to master or cue? Also check the post setting to enable mic on the booth out. Are you using XLR or jack input?
Are both mic 1 & 2 inputs not working?
Check the mic attenuation settings in the MCX8000 menu
Have other mics worked in the past?
Are both mic 1 & 2 inputs not working?
Check the mic attenuation settings in the MCX8000 menu
Have other mics worked in the past?
Inviato Tue 27 Aug 19 @ 7:58 pm
MickyMix250
I ended up using an olf Numark mic which worked just fine in both inputs.
The Sm58 and Akg were both connected by jack.
I should add that they are both brand new.
The Sm58 and Akg were both connected by jack.
I should add that they are both brand new.
Inviato Wed 28 Aug 19 @ 12:12 pm
kradcliffe
No idea. Bad cables?
The MCX mic channels are hardware based so should work all the time.
The MCX mic channels are hardware based so should work all the time.
Inviato Wed 28 Aug 19 @ 12:35 pm
MickyMix250
Not the cables, used the same cable for the Numark and SM58.
Tried a standard jack to jack and a TRX cable on the Sr40.
I will have to check specs on impedence etc.
But I find it hard to believe that an SM58 would not work. Thats been around since the 80's and is standard issue worldwide.
Puzzled........
Tried a standard jack to jack and a TRX cable on the Sr40.
I will have to check specs on impedence etc.
But I find it hard to believe that an SM58 would not work. Thats been around since the 80's and is standard issue worldwide.
Puzzled........
Inviato Thu 29 Aug 19 @ 12:42 am